Clamp On Muzzle Brakes
The Gunbloke Clamp on muzzle brake kit Bundled with the EXTERMINATOR reverse venting muzzle brake.
Features:
- A whopping 70% recoil reduction (Dependant on calibre & projectile weight)
- The MOST clamping force available on the market
- Made to suit your barrel.
- Made to suit your calibre
- Choice of Cerakote colours.
NO OTHER CLAMP ON MUZZLE BRAKE comes close.
PLEASE NOTE - THIS IS A CUSTOM CLAMP ON ASSEMBLY & WILL TAKE 6-9 WEEKS FROM ORDER.
HOW TO MEASURE FOR CLAMP ON ADAPTER
We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.
The Gunbloke Clamp on muzzle brake kit Bundled with the ELIMINATOR muzzle brake.
Clamping System Features:
- Add threads to a barrel without threading the barrel!
- The most clamping force on the market.
- Accepts Muzzle Brakes threaded in 5/8x24
- Milled from solid 416 stainless steel bar stock to exactly fit your barrel
- available in nearly any caliber and threaded 5/8-24.
Muzzle Brake Features:
- "THE ELIMINATOR" Muzzle Brake & Compensator provides recoil reduction with reduced muzzle blast.
- 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
- Machined from high strength steel or Stainless Steel
- 5/8x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
NO OTHER CLAMP ON MUZZLE BRAKE comes close.
PLEASE NOTE - THIS IS A CUSTOM CLAMP ON ASSEMBLY & WILL TAKE 6-9 WEEKS FROM ORDER.
HOW TO MEASURE FOR CLAMP ON ADAPTER
We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.
Add threads to a barrel without threading the barrel!
Our clamp on threaded adapter allows you to install threaded muzzle devices such as muzzle brakes without having to permanently alter your barrel.
The most clamping force on the market.
Accepts all Gunbloke Muzzle Brakes threaded in 5/8x24
Milled from solid 416 stainless steel bar stock to exactly fit your barrel, available in nearly any caliber and threaded 5/8-24.
Finish options include tumbled stainless (matte) as well as Cerakote finishes.
PLEASE NOTE: We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch or hundredths of a millimeter.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
$20 discount applies if bundled with a Gunbloke Muzzle Brake in your ORDER.
(A muzzle brake must also be purchased to the get the discounted price)
PLEASE NOTE - THIS IS A CUSTOM CLAMP ON ASSEMBLY & WILL TAKE 6-10 WEEKS FROM ORDER.
HOW TO MEASURE FOR CLAMP ON ADAPTER:
We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.
- 1