Norinco

• 7 horizontal cutouts equally spaced with compensation
• No Bottom Porting
• Made from machined steel
• Colour matte black
• Dimensions: 1.75" (4.4cm) long 7/8" (22mm)
• Thread diameter 1/2x0 (1/2" UNF)
• Reduces muzzle blast, Reduces Muzzle Jum and helps dissipates gas for more control during shooting.
• Includes crush washer.

• THE DOMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 63mm OAL, 21mm dia, 80gr.
• 1/2x20 (1/2" UNF) thread

• The Triple-Tac Plus Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 58mm OAL, 22mm dia, 36gr

• "MAX-TAC2" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength Steel.
• 1/2x20 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 58mm long, 25mm OD, 22.3mm muzzle face.
• Weight: 110 Grams
• Colour Black

The Gunbloke Clamp on muzzle brake kit Bundled with the EXTERMINATOR reverse venting muzzle brake.

• A whopping 70% recoil reduction (Dependant on calibre & projectile weight)
• The MOST clamping force available on the market
• Made to suit your barrel.
• Made to suit your calibre
• Choice of Cerakote colours.

NO OTHER CLAMP ON MUZZLE BRAKE comes close.

PLEASE NOTE - THIS IS A CUSTOM CLAMP ON ASSEMBLY & WILL TAKE 6-9 WEEKS FROM ORDER.

HOW TO MEASURE FOR CLAMP ON ADAPTER

We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.

• 5 horizontal cutouts equally spaced with compensation
• No Bottom Porting
• Made from machined steel
• Colour matte black
• Dimensions: 1.75" (4.4cm) long 7/8" (2.2cm)
• Thread diameter 1/2" - 20 tpi,
• Reduces muzzle blast, Reduces Muzzle Jum and helps dissipates gas for more control during shooting.
• Includes crush washer.

The Gunbloke Clamp on muzzle brake kit Bundled with the ELIMINATOR muzzle brake.

Clamping System Features:

• Add threads to a barrel without threading the barrel!
• The most clamping force on the market.
• Accepts Muzzle Brakes threaded in 5/8x24
• Milled from solid 416 stainless steel bar stock to exactly fit your barrel
• available in nearly any caliber and threaded 5/8-24.

Muzzle Brake Features:

• "THE ELIMINATOR" Muzzle Brake & Compensator provides recoil reduction with reduced muzzle blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel or Stainless Steel
• 5/8x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability

NO OTHER CLAMP ON MUZZLE BRAKE comes close.

PLEASE NOTE - THIS IS A CUSTOM CLAMP ON ASSEMBLY & WILL TAKE 6-9 WEEKS FROM ORDER.

HOW TO MEASURE FOR CLAMP ON ADAPTER

We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.

• Multi-port brake softens felt recoil and reduces muzzle rise.
• A single expansion chamber and an array of ports with a closed off bottom for compensation provide maximum recoil control.
• Machined from high strength steel.
• 1/2-20 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability