18x1mm Muzzle Brakes

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
• Weight 170gr

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 18x1mm thread
• 70mm OAL, 24.7mm dia, 120gr.

• FAT-MAX2 is designed specifically for high precision rifles and long range hunting rifles.
• A large symmetrical blast baffle along with compensated forward baffles provide unprecedented muzzle control and recoil management while minimizing induced bullet yaw for improved long range accuracy.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 1 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Weight 210gr,
• Length 78mm, Width 35mm, tapers to 22mm
• Package includes 1 x muzzle brake & lock nut

• "THE ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 105 Grams

• The Triple-Tac2 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 14x1mm thread 58mm OAL, 25.4mm dia, 100g.
• PLEASE NOTE Internal bore is .330, available in larger ID's to suit bigger calibres

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

• Maximum Recoil Reduction for Long Range Precision Rifles.
  Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Machined from high strength steel bar.
• 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability

• The Small-Stubby Muzzle Brake Compensator features 2 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 18x1mm thread 45mm OAL, 25mm dia, .90g.

1/2x28 Jam Nut / Lock Nut- Black

• The MAX-TAC2 Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research & testing into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast. This results in recoil reduction with virtually no "puff" back at the shooter…
• Shooters, you can now watch your shots hit the target with no Dust Blow Ups!
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm long, 25mm diameter, taper to 22mm
• Weight: 100 Grams