EXTERMINATOR

THE EXTERMINATOR REVERSE VENTING MUZZLE BRAKE offering a massive 70% recoil Reduction GUNBLOKE
Sort By:  
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$130.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$130.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$130.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$150.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$150.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$150.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
Clamp On Muzzle Brake plus THE EXTERMINATOR MUZZLE BRAKE
$250.00
THE EXTERMINATOR - Reverse Venting 3/4x24 (EXTERM-3/4x24)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 3/4x24
Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 3/4x24 TPI thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$130.00
THE EXTERMINATOR - Reverse Venting 17x1mm (EXTERMINATOR-17x1)
THE EXTERMINATOR Reverse Venting 17x1mm Muzzle Brake Compensator

THE EXTERMINATOR - 17x1 - any cal

Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 17x1mm thread
  • 70mm OAL, 24.7mm dia, 120gr.
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$130.00
THE EXTERMINATOR - Reverse Venting 9/16x28 (EXTERMINATOR-9/16x28)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 9/16x28
Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 9/16x28 TPI thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$130.00
Lithgow LA102/LA105 THE EXTERMINATOR Reverse Venting muzzle brake Titanium / Armor Black (EXTERMINATOR-LA102/LA105-Cerakote)
LITHGOW LA102/LA105 Muzzle Brake Compensator

Comes in either Titanium or Armor Black Cerakote
Also includes lock nut to suit in Cerakote.

THE EXTERMINATOR Reverse Venting muzzle Brake 

Available in 1/2x28, 14x1 or 5/8x24

Features:

  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 1/2x28, 14x1mm or 5/8x24 thread
  • 70mm OAL, 24.7mm dia, 120gr.


AVAILABLE IN: TITANIUM or ARMOR BLACK
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$150.00
THE EXTERMINATOR - Reverse Venting 9/16x24 (EXTERMINATOR-9/16x24)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 9/16x24
Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 9/16x24 TPI thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR - Reverse Venting 18x1mm (EXTERMINATOR-18x1)
THE EXTERMINATOR Reverse Venting 14x1mm Muzzle Brake Compensator

THE EXTERMINATOR - 18x1 - any cal

Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 18x1mm thread
  • 70mm OAL, 24.7mm dia, 120gr.
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR - Reverse Venting 14x1mm (EXTERMINATOR-14x1)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 14x1mm
Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 14x1mm thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
BROWNING X-BOLT THE EXTERMINATOR Reverse Venting muzzle brake BURNT BRONZE CERAKOTE (EXTERMINATOR-BURNT BRONZE)

BROWNING X-BOLT Muzzle Brake Compensator Cerakoted in BURNT BRONZE

Also includes lock nut to suit in Cerakote.

Available in 5/8x24 or 13x1.25mm thread size - Please confirm before ordering.

Features:

  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • Colour: Burnt Bronze Cerakote
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$150.00
Lithgow LA101 THE EXTERMINATOR Reverse Venting muzzle brake Titanium / Armor Black ( THE EXTERMINATOR -LA101-Cerakote)
LITHGOW CROSSOVER LA-101 MUZZLE BRAKE - THE EXTERMINATOR
Threaded in 1/2x20 or 1/2x28

Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 1/2x20 or 1/2x28 thread
  • 70mm OAL, 24.7mm dia, 120gr.


AVAILABLE IN: TITANIUM or ARMOR BLACK
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$150.00
THE EXTERMINATOR 5/8x24 - Reverse Venting muzzle brake (THE EXTERMINATOR-5/8x24)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 5/8x24

Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 5/8x24 (5/8" UNEF) thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR - Reverse Venting 15x1mm Muzzle Brake (EXTERMINATOR-15x1)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 15x1mm
Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 15x1mm thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR - Reverse Venting muzzle brake 1/2x28 (EXTERMINATOR-1/2x28)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 1/2x28

Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 1/2x28 (1/2" UNEF) thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
THE EXTERMINATOR - Reverse Venting muzzle brake 1/2x20 (EXTERMINATOR-1/2x20)
THE EXTERMINATOR Muzzle Brake Compensator

Includes lock nut to suit.

THE EXTERMINATOR - 1/2x20

Features:
  • THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
  • Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
  • Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
  • This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
  • Machined from high strength steel.
  • High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
  • Computer CAE optimized for maximum strength to weight ratio and impact survivability
  • 70mm OAL, 24.7mm dia, 120gr.
  • 1/2x20 (1/2" UNF) thread
THE EXTERMINATOR Reverse Venting muzzle Brake offering a huge 70% recoil reduction with compensation.
Add to Cart
$125.00
Clamp On Muzzle Brake Kit - THE BEST CLAMP ON SOLUTION ON THE MARKET (Clamp on muzzle brake kit)

CUSTOM ORDER - PLEASE SUBMIT YOUR ENQUIRY THOUGH THE CONTACT US FORM 


The Gunbloke Clamp on muzzle brake kit Bundled with the EXTERMINATOR reverse venting muzzle brake.


Features:
  • A whopping 70% recoil reduction (Dependant on calibre & projectile weight)
  • The MOST clamping force available on the market
  • Made to suit your barrel.
  • Made to suit your calibre
  • Choice of Cerakote colours.


NO OTHER CLAMP ON MUZZLE BRAKE comes close.

HOW TO MEASURE FOR CLAMP ON ADAPTER

We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.

Clamp On Muzzle Brake plus THE EXTERMINATOR MUZZLE BRAKE
Per Page      1 - 14 of 14
  • 1