1/2x28 Muzzle Brakes - (1/2" UNEF)

• Machined from high strength aluminium.
• 1/2x20 (1/2" UNF) male thread
• Female thread options: 1/2x28

• The Small-Stubby Muzzle Brake Compensator features 2 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Colour: Armor Black Cerakote
• 45mm OAL, 25mm dia, 90g.
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

MARLIN 336/1895 M11-Precision Long Range Muzzle Brake Compensator with Lock Nut

Features:

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• Featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
• Weight 170gr
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

MARLIN DARK SERIES 336/1894/1895 M11-Precision Long Range Muzzle Brake Compensator with Lock Nut
Cerakoted in Armor Black

Features:

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• Featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Colour: Armor Black Cerakote
• Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
• Weight 170gr
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

• The Triple-Tac2 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel or high grade stainless steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 58mm OAL, 25.4mm dia,
• Colour: Armor Black Cerakote
• Weight: 100g.
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

TLC-TACTICAL LOW CONCUSSION 1/2x28 Muzzle Brake

Features:

• The Tactical Low Concussion (TLC) Muzzle Brake design combines the effectiveness of a brake with critical reduction in overpressure and concussion.
• The TLC Muzzle Brake takes advantage of the state of the art Computational Fluid Dynamics software currently available.
• Designed for specific dynamic goals, the TLC Muzzle Brake tames recoil with superior reductions in firing point concussion and overpressure!
• Optimized linear baffles for maximum brake performance and low concussion
• Designed for CQB and Low Concussion to operators, also for use on long range tactical rifles and scout rifles too.
• No timing necessary
• No external ports = no dust printing
• Machined from high strength steel.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Weight: 110gr
• Dimensions: 22.5mm diameter x 58mm long
• 1/2x28 TPI thread (1/2" UNEF)
• Colour: Black (Tenifer Case Hardened)

• The RADIAL-PLUS Muzzle Brake Compensator features a unique radial design which is designed to reduce recoil and muzzle rise for improved control and quicker follow up shots
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable solid shield & top vented shield.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• available in 1/2x20TPI thread (1/2" UNF) or 1/2x28TPI (1/2" UNEF) Please confirm before ordering
• Machined to suit your cal. 
• Muzzle Brake Specs: 15x1mm, 60mm OAL, 25mm dia (barrel end), 18mm dia , 75gr
• Blast Shield Specs: 13/16x16 TPI thread, 60mm OAL, 32mm dia, 60gr

• The Triple-Tac Plus Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 58mm OAL, 22mm dia, 36gr
• 1/2x28, 14x1mm or 5/8x24 thread
• Machined to suit your cal. 

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Machined from high strength steel bar.
• 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28, 14x1mm or 5/8x24 thread

• The D-TAC1 Muzzle Brake is the result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. A massive rectangular blast baffle, combined with one front baffle redirects gases to the sides and delivering recoil reduction while also minimizing muzzle rise
• Offset porting greatly reduces recoil impulse and muzzle rise so the firearm tracks straight back to keep you on target for faster shot-to-shot recovery\
• Pilot holes for tuning of muzzle brake and to pin-and-weld on short-barreled rifles
• This results in recoil reduction of up to 60+%
• You can watch your shots hit the target.
• High-precision barrel threads for optimum thread interface - 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Pecision machined from high strength steel bar.
• Dimensions: 65mm long, 22mm diameter
• Weight: 100 Grams

LITHGOW LA102/LA105 Muzzle Brake Compensator


Comes in either Titanium or Armor Black Cerakote
Also includes lock nut to suit in Cerakote.

M11- Precision Long Range - any cal

Available in 1/2x28, 14x1 or 5/8x24

Features:

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• Ffeaturing High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28, 14x1mm or 5/8x24 thread
• Length: 56.5mm, Width 28mm, Height 25mm, Tapers to 20mm
• Weight: 94gr

• 5 horizontal cutouts equally spaced with compensation
• No Bottom Porting
• Made from machined steel
• Colour matte black
• Dimensions: 1.75" (4.4cm) long 7/8" (2.2cm)
• Thread diameter 1/2" - 28 tpi,
• Reduces muzzle blast, Reduces Muzzle Jum and helps dissipates gas for more control during shooting.
• Includes crush washer.

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 56.5mm, Width 28mm, Height 25mm, Tapers to 20mm
• Weight: 94gr

Available in 1/2x28, 14x1 or 5/8x24

Features:

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28, 14x1mm or 5/8x24 thread
• 70mm OAL, 24.7mm dia, 120gr.

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x20 or 1/2x28 thread
• 70mm OAL, 24.7mm dia, 120gr.

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 70mm OAL, 24.7mm dia, 120gr.
• 1/2x28 (1/2" UNEF) thread

• FAT-MAX2 is designed specifically for high precision rifles and long range hunting rifles.
• A large symmetrical blast baffle along with compensated forward baffles provide unprecedented muzzle control and recoil management while minimizing induced bullet yaw for improved long range accuracy.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 1 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 1/2-28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight 210gr,
• Length 78mm, Width 35mm, tapers to 22mm
• Package includes 1 x muzzle brake & lock nut

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• Featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 18.9mm
• Weight: 173gr
• Package includes 1 x muzzle brake & lock nut
• 14x1mm or 5/8x24 or 1/2x28 thread

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 18.9mm
• Weight: 173gr
• Package includes 1 x muzzle brake & lock nut

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 14x1mm or 5/8x24 or 1/2x28 thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

• 4 CHAMBER MUZZLE BRAKE + BLAST SHIELD / SOUND FORWARDER
• The Quad-Tac-Plus Muzzle Brake Compensator features 4 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents. 
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight shield & spriral shield.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Includes lock nut for indexing
• 1/2-28 TPI thread (1/2" UNEF)
• Muzzle Brake Dimension: 74mm OAL, 25mm dia, 100g
• Blast Shield Dimensions: 57mm OAL, 25mm dia, 57g
• Includes lock nut for indexing

• 4 CHAMBER MUZZLE BRAKE + BLAST SHIELD / SOUND FORWARDER
• The Quad-Tac-Plus Muzzle Brake features 4 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents. 
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight shield & spriral shield.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x20TPI thread (1/2" UNF) or 1/2x28 (1/2' UNEF 2018 on models)
• Muzzle Brake Dimension: 74mm OAL, 25mm dia, 100g
• Blast Shield Dimensions: 57mm OAL, 25mm dia, 57g
• Includes lock nut for indexing

• "THE NEUTRALIZER" Muzzle Brake & Compensator provides maximum recoil reduction & muzzle jump compensation.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement.
• 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large baffles, each featuring 180 degree vertical open ports redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Dimensions: 48mm long, 25.5mm diameter, Bore 9.7mm (0.385" )
• Weight: 75 Grams

• Advanced 3 Prong design that delivers superior performance that greatly reduces muzzle flash
• Typically more than 99% muzzle flash reduction
• Made from machined steel
• Colour matte black
• Thread diameter 1/2" - 28 tpi,
• Includes crush washer.
• Suits .17/.204/.22/.223/5.56mm

• "THE LIGHTWEIGHT ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength Aluminium.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 40 Grams

• 7 horizontal cutouts equally spaced with compensation
• No Bottom Porting
• Made from machined steel
• Colour matte black
• Dimensions: 1.75" (4.4cm) long 7/8" (22mm)
• Thread diameter 1/2x28 (1/2" UNEF)
• Reduces muzzle blast, Reduces Muzzle Jum and helps dissipates gas for more control during shooting.
• Includes crush washer.

• Machined from high grade Stainless Steel.
• 1/2x28 (1/2"UNEF) female thread
• 5/8x24 (5/8"UNEF) male thread

• "THE NULLIFIER" Muzzle Brake & Compensator provides maximum recoil reduction & muzzle jump compensation.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 2 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 2 large baffles, each featuring open top ports redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28 (1/2" UNEF) thread
• Black
• Dimensions: 45mm long, 25mm diameter
• Weight: 81 Grams

• The Tactical Low Concussion (TLC) Muzzle Brake design combines the effectiveness of a brake with critical reduction in overpressure and concussion.
• The TLC Muzzle Brake takes advantage of the state of the art Computational Fluid Dynamics software currently available.
• Designed for specific dynamic goals, the TLC Muzzle Brake tames recoil with superior reductions in firing point concussion and overpressure!
• Optimized linear baffles for maximum brake performance and low concussion
• Designed for CQB and Low Concussion to operators, also for use on long range tactical rifles and scout rifles too.
• No timing necessary
• No external ports = no dust printing
• Machined from high strength steel.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Weight: 110gr
• Dimensions: 22.5mm diameter x 58mm long

• 6 large symmetric baffles, each featuring 2 vertical ports & 1 horizontal port, redirect a massive volume of gas away from the bore axis. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Closed bottom in compensator greatly diminishes dust signature.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• 1/2-20 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability.

• 6 large symmetric baffles, each featuring 2 vertical ports & 1 horizontal port, redirect a massive volume of gas away from the bore axis. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Closed bottom in compensator greatly diminishes dust signature.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• 1/2-28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Length - 103mm, dia. 25.5mm, 153gr
• Fits .22LR, .22WMR, .223, .22-250 & all .22-.223 rounds

• THE DOMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 63mm OAL, 23mm dia, 95gr.
• 1/2x28 (1/2" UNEF) thread

• The Triple-Tac1 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28 (1/2" UNEF) thread 58mm OAL, 22mm dia, .73.7g.

• Multi-port brake softens felt recoil and reduces muzzle rise.
• A single expansion chamber and 39 total ports, provide maximum recoil control. 
• Machined from high strength steel.
• 1/2-28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 67mm long, 15.9mm diameter,
• Weight: 63 Grams

• Multi-port brake softens felt recoil and reduces muzzle rise.
• A single expansion chamber and an array of ports with a closed off bottom for compensation provide maximum recoil control.
• Machined from high strength steel.
• 1/2-28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability

• Multi-port brake softens felt recoil and reduces muzzle rise.
• A single expansion chamber and an array of ports with a closed off bottom for compensation provide maximum recoil control.
• Machined from high strength steel.
• 1/2-20 or 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability

LITHGOW LA102 / LA105 Muzzle Brake

Comes in either Titanium or Armor Black Cerakote
Also includes crush washer to suit in Cerakote.

QUAD-TAC PLUS - any cal (PLEASE Confirm your thread size prior to ordering)

Features:

• 4 CHAMBER MUZZLE BRAKE + BLAST SHIELD / SOUND FORWARDER
• The Quad-Tac-Plus Muzzle Brake Compensator features 4 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents. 
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight shield & spriral shield.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Ceraloted Lock Nut for indexing
• 1/2x28 or 14x1mm or 5/8x24 thread
• Machined to suit your cal. 

• The MAX-TAC2 Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research & testing into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast. This results in recoil reduction with virtually no "puff" back at the shooter…
• Shooters, you can now watch your shots hit the target with no Dust Blow Ups!
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm long, 25mm diameter, taper to 22mm
• Weight: 100 Grams
• Made to suit your calibre

• The RV3 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28, 14x1mm or 5/8x24 thread
• 65mm OAL, 24mm dia, 126gr.

• The RV3 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28 (1/2" UNEF) thread
• 65mm OAL, 24mm dia, .126gr.

• The MAX-TAC2 Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research & testing into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast. This results in recoil reduction with virtually no "puff" back at the shooter…
• Shooters, you can now watch your shots hit the target with no Dust Blow Ups!
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm long, 25mm diameter, taper to 22mm
• Weight: 100 Grams
• Made to suit your calibre
• 1/2x28, 14x1mm or 5/8x24 thread

LITHGOW LA101 1/2x20 or 1/2x28 Muzzle Brake Compensator - THE LIGHTWEIGHT ELIMINATOR 

ONLY WEIGHS 40grams

Comes in either Titanium or Armor Black Cerakote
Also includes crush washer to suit in Cerakote.


Features:

• "THE ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 1/2x20 or 1/2x28 thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 40 Grams

• 5 horizontal cutouts equally spaced with compensation
• No Bottom Porting
• Made from machined steel
• Colour matte black
• Dimensions: 1.75" (4.4cm) long 7/8" (22mm)
• Thread diameter 5/8x24 tpi (5/8'UNEF)
• Reduces muzzle blast, Reduces Muzzle Jum and helps dissipates gas for more control during shooting.
• Includes crush washer.

• The Triple-Tac Plus Muzzle Brake features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 58mm OAL, 22mm dia, 36gr
• Includes lock nut for indexing

• The RADIAL-PLUS Muzzle Brake Compensator features a unique radial design which is designed to reduce recoil and muzzle rise for improved control and quicker follow up shots
  Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable shield & spriral shield.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 15x1mm, 60mm OAL, 25mm dia (barrel end), 18mm dia , 75gr
• Blast Shield Specs: 13/16x16 TPI thread, 60mm OAL, 32mm dia, 60gr

• Maximum Recoil Reduction for Long Range Precision Rifles.
  Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Machined from high strength steel bar.
• 1/2"x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut, 1 x crush washer.

• Multi-port brake softens felt recoil and reduces muzzle rise.
• A single expansion chamber and 39 total ports, provide maximum recoil control. 
• Machined from high strength steel.
• 1/2-28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 67mm long, 18mm diameter,
• Weight: 63 Grams

LITHGOW LA101 Muzzle Brake Compensator

Available in either 1/2x20 or 1/2x28 (PLEASE ASEE ATTACHED IMAGE OF MUZZLE CAP)

Comes in either Titanium or Armor Black Cerakote
Also includes lock nut to suit in Cerakote.

TRIPLE-TAC1 -  SUITS .17HMR, .22LR & .22WMR

Features:

• The Triple-Tac1 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x20 or 1/2x28 thread 58mm OAL, 22mm dia, .73.7g.
• Made to suit .17HMR, .22LR, .22WMR

• "THE ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 105 Grams

• The Small-Stubby Muzzle Brake Compensator features 2 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28 (1/2" UNEF) thread 45mm OAL, 25mm dia, .90g.

1/2x28 Jam Nut / Lock Nut- Black

• LIGHT WEIGHT TANKER is designed specifically for high precision rifles where weight becomes a factor.
• Offering 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 97 grams
• Length: 67mm, Width: 35mm Height: 18mm
• Package includes 1 x muzzle brake, 1 x lock nut