1/2x36 Muzzle Brakes

TLC-TACTICAL LOW CONCUSSION 1/2"x36 tpi Muzzle Brake bored to suit 9mm /.355

Features:

• The Tactical Low Concussion (TLC) Muzzle Brake design combines the effectiveness of a brake with critical reduction in overpressure and concussion.
• The TLC Muzzle Brake takes advantage of the state of the art Computational Fluid Dynamics software currently available.
• Designed for specific dynamic goals, the TLC Muzzle Brake tames recoil with superior reductions in firing point concussion and overpressure!
• Optimized linear baffles for maximum brake performance and low concussion
• Designed for CQB and Low Concussion to operators, also for use on long range tactical rifles and scout rifles too.
• No timing necessary
• No external ports = no dust printing
• Machined from high strength steel.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Weight: 110gr
• Dimensions: 22.5mm diameter x 58mm long
• 1/2"x36tpi thread
• Colour: Black (Tenifer Case Hardened)

THE ELIMINATOR 1/2"x36 threaded Muzzle Brake Compensator

Bored to suit 9mm calibres.

Features:

• "THE ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 1/2x36 thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 105 Grams
• Bored to suit 9mm calibre