Search

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
• Weight 170gr

• "THE ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 105 Grams

• The Triple-Tac Plus Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 13/16x16 TPI thread, 58mm OAL, 22mm dia, 36gr
• Machined to suit your cal. please state colour & cal on checkout.

• THE DOMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 63mm OAL, 23mm dia, 95gr.
• 15x1mm thread

• The Small-Stubby Muzzle Brake Compensator features 2 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 5/8x24 (5/8" UNEF) thread 45mm OAL, 25mm dia, .90g.

• THE DOMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 63mm OAL, 23mm dia, 95gr..
• 5/8x24 (5/8" UNEF) thread

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 9/16x24TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

THE M11-Precision Long Range 5/8x24 Muzzle Brake Compensator with Lock Nut

LARGE SIZE

Features:

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• 5/8x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
• Weight 170gr

• "THE NULLIFIER" Muzzle Brake & Compensator provides maximum recoil reduction & muzzle jump compensation.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 2 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 2 large baffles, each featuring open top ports redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 5/8x24 (5/8" UNEF) thread
• Black
• Dimensions: 45mm long, 25mm diameter
• Weight: 81 Grams

• "THE ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
  The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 5/8x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 105 Grams

• The Triple-Tac Plus Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 14x1mm thread
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 58mm OAL, 22mm dia, 36gr
• Machined to suit your cal. please state colour & cal on checkout.

• The RADIAL-PLUS Muzzle Brake Compensator features a unique radial design which is designed to reduce recoil and muzzle rise for improved control and quicker follow up shots
  Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable shield & spriral shield.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 15x1mm thread
• Machined to suit your cal. 
• Muzzle Brake Specs: 15x1mm, 60mm OAL, 25mm dia (barrel end), 18mm dia , 75gr
• Blast Shield Specs: 13/16x16 TPI thread, 60mm OAL, 32mm dia, 60gr

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 70mm OAL, 24.7mm dia, 120gr.
• 1/2x20 (1/2" UNF) thread

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 70mm OAL, 24.7mm dia, 120gr.
• 1/2x28 (1/2" UNEF) thread

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 70mm OAL, 24.7mm dia, 120gr.
• 15x1mm thread

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 70mm OAL, 24.7mm dia, 120gr.
• 5/8x24 (5/8" UNEF) thread

BROWNING X-BOLT Muzzle Brake Compensator Cerakoted to BURNT BRONZE X-BOLT

Includes lock nut to suit

Available in 5/8x24 or 13x1.25mm thread size - Please confirm before ordering.
Features:

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 70mm OAL, 24.7mm dia, 120gr.
• Colour:Black (Non Cerakote) or Burnt Bronze Cerakote

Available in 1/2x28, 14x1 or 5/8x24

Features:

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28, 14x1mm or 5/8x24 thread
• 70mm OAL, 24.7mm dia, 120gr.

• THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x20 or 1/2x28 thread
• 70mm OAL, 24.7mm dia, 120gr.

• The Triple-Tac Plus Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 58mm OAL, 22mm dia, 36gr

• 4 CHAMBER MUZZLE BRAKE + BLAST SHIELD / SOUND FORWARDER
• The Quad-Tac-Plus Muzzle Brake Compensator features 4 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents. 
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight shield & spriral shield.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Includes lock nut for indexing
• 1/2-20 TPI thread (1/2" UNF)
• Muzzle Brake Dimension: 74mm OAL, 25mm dia, 100g
• Blast Shield Dimensions: 57mm OAL, 25mm dia, 57g
• Includes lock nut for indexing

LITHGOW LA101 Muzzle Brake Compensator

Available in either 1/2x20 or 1/2x28 (PLEASE ASEE ATTACHED IMAGE OF MUZZLE CAP)

Available in Titanium or Armor Black Cerakote
Also includes lock nut to suit

TRIPLE-TAC1 -  SUITS .17HMR, .22LR & .22WMR

Features:

• The Triple-Tac1 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x20 or 1/2x28 thread 58mm OAL, 22mm dia, .73.7g.
• Made to suit .17HMR, .22LR, .22WMR

• THE DOMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 14x1mm or 5/8x24 thread
• 63mm OAL, 23mm dia, 95gr.

AVAILABLE IN: TITANIUM or ARMOR BLACK

Please note: Lithgow have changed threads used in their rifles in mid 2018.  The easiest way to determine the thread on your rifle is by the muzzle cap/thread protector.  For 14x1mm thread the thread cap will have 2 grooves. For 5/8x24 the thread cap will only have 1 groove.  This only relates to the LA102, the LA105 is only available in 5/8x24

• THE DOMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x20 thread
• 63mm OAL, 23mm dia, 95gr.

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 3/4x20 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 1871mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 15x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut, 1 x crush washer.

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 5/8x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

THE TANKER II MUZZLE BRAKE by GUNBLOKE from Gunbloke.com on Vimeo.

• THE TANKER II is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric reverse venting baffles, each featuring 2 horizontal ports, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom greatly diminishes dust signature.
• Machined from high strength steel.
• 3/4x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 350 grams
• Length: 76.2mm, Width: 50.8mm Height: 26.9mm
• Package includes 1 x muzzle brake, 1 x lock nut

• "THE NULLIFIER" Muzzle Brake & Compensator provides maximum recoil reduction & muzzle jump compensation.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 2 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 2 large baffles, each featuring open top ports redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28 (1/2" UNEF) thread
• Black
• Dimensions: 45mm long, 25mm diameter
• Weight: 81 Grams

• FAT-MAX2 is designed specifically for high precision rifles and long range hunting rifles.
• A large symmetrical blast baffle along with compensated forward baffles provide unprecedented muzzle control and recoil management while minimizing induced bullet yaw for improved long range accuracy.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 1 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Weight 210gr,
• Length 78mm, Width 35mm, tapers to 22mm
• Package includes 1 x muzzle brake & lock nut

• FAT-MAX2 is designed specifically for high precision rifles and long range hunting rifles.
• A large symmetrical blast baffle along with compensated forward baffles provide unprecedented muzzle control and recoil management while minimizing induced bullet yaw for improved long range accuracy.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 1 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 5/8-24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight 210gr,
• Length 78mm, Width 35mm, tapers to 22mm
• Package includes 1 x muzzle brake & lock nut

• FAT-MAX1 is designed specifically for high precision rifles and long range hunting rifles.
• A large symmetrical blast baffle along with compensated forward baffles provide unprecedented muzzle control and recoil management while minimizing induced bullet yaw for improved long range accuracy.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 1 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 5/8-24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Length 62.5mm, OD: 28mm, OD Barrel end: 21mm (would suit up to 22mm) ,
• Weight 110gr
• Package includes 1 x muzzle brake & lock nut

• FAT-MAX1 is designed specifically for high precision rifles and long range hunting rifles.
• A large symmetrical blast baffle along with compensated forward baffles provide unprecedented muzzle control and recoil management while minimizing induced bullet yaw for improved long range accuracy.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 1 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 1/2x28 tpi thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Length 62.5mm, OD: 28mm, OD Barrel end: 21mm (would suit up to 22mm) ,
• Weight 110gr
• Package includes 1 x muzzle brake & lock nut

• "THE COMPACT1" Muzzle Brake & Compensator provides maximum recoil reduction & muzzle jump compensation.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 2 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 2 large baffles, each featuring open top ports redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength Aluminium.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 13.5x1mm lh thread
• Black
• Dimensions: 35mm long, 19mm high, 25mm Wide
• Weight: 25 Grams 

• "THE COMPACT2" Muzzle Brake & Compensator provides maximum recoil reduction & muzzle jump compensation.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 2 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 2 large baffles, each featuring open top ports redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength Aluminium.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 13.5x1mm lh thread
• Black
• Dimensions: 35mm long, 19mm high, 25mm Wide
• Weight: 25 Grams 

• The Small-Stubby Muzzle Brake Compensator features 2 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Colour: Armor Black Cerakote
• 45mm OAL, 25mm dia, 90g.
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

MARLIN DARK SERIES 336/1894/1895 M11-Precision Long Range Muzzle Brake Compensator with Lock Nut
Cerakoted in Armor Black

Features:

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• Featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Colour: Armor Black Cerakote
• Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
• Weight 170gr
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

• The Triple-Tac2 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel or high grade stainless steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 58mm OAL, 25.4mm dia,
• Colour: Armor Black Cerakote
• Weight: 100g.
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

• The Triple-Tac Plus Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs:  58mm OAL, 22mm dia, 36gr
• Machined to suit your cal. please state colour & cal on checkout.

MARLIN 336/1895 M11-Precision Long Range Muzzle Brake Compensator with Lock Nut

Features:

• Maximum Recoil Reduction for Long Range Precision Rifles.
• Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
• Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
• Delivers recoil energy reduction of 70% or higher for many cartridges.
• Closed bottom minimizes dust signature when shooting prone.
• Top venting gas ports provide significant reduction in muzzle climb/jump.
• Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
• Machined from high strength steel bar.
• Featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
• Weight 170gr
• Package includes: 1x Muzzle Brake, 1 x Lock Nut

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 14x1 thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 20.5mm
• Weight: 173gr
• Black
• Package includes 1 x muzzle brake & lock nut

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 15x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 18.9mm
• Weight: 173gr
• Black
• Package includes 1 x muzzle brake & lock nut

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• Featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 18.9mm
• Weight: 173gr
• Package includes 1 x muzzle brake & lock nut
• 14x1mm or 5/8x24 or 1/2x28 thread

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 1/2x28 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 18.9mm
• Weight: 173gr
• Package includes 1 x muzzle brake & lock nut

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 9/16x24tpi thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 18.9mm
• Weight: 173gr
• Black
• Package includes 1 x muzzle brake & lock nut

• THE TANKER is designed specifically for high precision rifles and long range hunting rifles.
• 3 large symmetric baffles, each featuring 2 horizontal ports & 2 vertical compensation port, redirect a massive volume of gas away from the bore axis.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• The Closed bottom in compensator greatly diminishes dust signature.
• Machined from high strength steel.
• 5/8-24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Black
• Weight: 173gr
• Length: 60mm, Width: 38mm Height: 22mm Muzzle face: 18.9mm
• Package includes 1 x muzzle brake & lock nut

1/2x28 Jam Nut / Lock Nut- Black

• Maximum Recoil Reduction for Long Range Precision Rifles.
  Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Machined from high strength steel bar.
• 5/8x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability

• The Triple-Tac2 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel or high grade stainless steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 5/8x24 (5/8" UNEF) thread
• Dimensions: 58mm OAL, 25.4mm dia,
• Weight: 100g.

• "THE ELIMINATOR" Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
• The result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast.
• 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
• Machined from high strength steel.
• 9/16x24 thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Dimensions: 70mm (2.75") long, 22.5mm (0.9") diameter
• Weight: 105 Grams

LITHGOW LA102 / LA105 Muzzle Brake

Comes in either Titanium or Armor Black Cerakote
Also includes crush washer to suit in Cerakote.

QUAD-TAC PLUS - any cal (PLEASE Confirm your thread size prior to ordering)

Features:

• 4 CHAMBER MUZZLE BRAKE + BLAST SHIELD / SOUND FORWARDER
• The Quad-Tac-Plus Muzzle Brake Compensator features 4 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents. 
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight shield & spriral shield.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Ceraloted Lock Nut for indexing
• 1/2x28 or 14x1mm or 5/8x24 thread
• Machined to suit your cal. 

• The Small-Stubby Muzzle Brake Compensator features 2 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 11/16x24 thread 45mm OAL, 25mm dia, .90g.

• The Small-Stubby Muzzle Brake Compensator features 2 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 1/2x28 (1/2" UNEF) thread 45mm OAL, 25mm dia, .90g.

• The Triple-Tac2 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
• Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
• Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
• This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
• Machined from high strength steel.
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• 11/16x24 thread 58mm OAL, 25.4mm dia, 100g.
• Supplied with Lock Nut

• The Triple-Tac Plus Muzzle Brake features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 58mm OAL, 22mm dia, 36gr
• Includes lock nut for indexing

• The Triple-Tac Plus Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side through the precisely canted vents.
• Innovative Removable Blast Shield directs gases & sound forward.
• The main body is Machined from high strength steel & with a removable lightweight Aluminium shield
• High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
• Computer CAE optimized for maximum strength to weight ratio and impact survivability
• Muzzle Brake Specs: 57mm OAL, 23mm dia, 62gr
• Blast Shield Specs: 58mm OAL, 22mm dia, 36gr