Tikka
















TRIPLE-TAC1 - 14x1 - any cal
Features:
- The Triple-Tac1 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
- Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
- Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
- This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
- Machined from high strength steel.
- High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- 14x1mm thread 58mm OAL, 22mm dia, .73.7g.
- Machined to suit your cal.
Features:
- The TAC-XTREME Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
- The result of extensive research & testing into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast. This results in recoil reduction with virtually no "puff" back at the shooter…
- Shooters, you can now watch your shots hit the target with no Dust Blow Ups!
- Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
- This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
- Machined from high strength steel.
- High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- Dimensions: 70mm long, 25mm diameter, taper to 22mm
- Weight: 100 Grams
Features:
- The TAC-XTREME Muzzle Brake & Compensator provides maximum recoil reduction with reduced muzzle blast.
- The result of extensive research & testing into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. 3 large expansion chambers plus top venting trap and redirect gases to eliminate dust printing, muzzle rise, and back blast. This results in recoil reduction with virtually no "puff" back at the shooter…
- Shooters, you can now watch your shots hit the target with no Dust Blow Ups!
- Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
- This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
- Machined from high strength steel.
- High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- Dimensions: 70mm long, 25mm diameter, taper to 22mm
- Weight: 100 Grams
- Package includes:
- 1 x Custom Trigger Spring
- 1 x Detailed printed instructions
- Package includes:
- 1 x Custom Trigger Spring
- 1 x Detailed printed instructions
- Package includes:
- 1 x Custom Trigger Spring
- 1 x Detailed printed instructions
Features:
- Maximum Recoil Reduction for Long Range Precision Rifles.
- Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
- Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
- Delivers recoil energy reduction of 70% or higher for many cartridges.
- Closed bottom minimizes dust signature when shooting prone.
- Top venting gas ports provide significant reduction in muzzle climb/jump.
- Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
- Machined from high strength steel bar.
- 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- Length: 56.5mm, Width 28mm, Height 25mm, Tapers to 20mm
- Weight: 94gr
Features:
- Maximum Recoil Reduction for Long Range Precision Rifles.
- Symmetrical Blast Chamber promotes a balanced gas flow for reduced bullet yaw and maximum accuracy potential.
- Stress optimized baffles diminish in thickness to minimize bore aperture wall surface and reduce baffle/projectile interaction.
- Delivers recoil energy reduction of 70% or higher for many cartridges.
- Closed bottom minimizes dust signature when shooting prone.
- Top venting gas ports provide significant reduction in muzzle climb/jump.
- Angled “V” shaped blast baffles divert reflected blast above and below shooters ear for lower perceived concussion and noise.
- Machined from high strength steel bar.
- 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- Length: 78mm, Width 45mm, Height 30mm, Tapers to 22mm
- Weight 170gr
The Gunbloke Clamp on muzzle brake kit Bundled with the EXTERMINATOR reverse venting muzzle brake.
Features:
- A whopping 70% recoil reduction (Dependant on calibre & projectile weight)
- The MOST clamping force available on the market
- Made to suit your barrel.
- Made to suit your calibre
- Choice of Cerakote colours.
NO OTHER CLAMP ON MUZZLE BRAKE comes close.
PLEASE NOTE - THIS IS A CUSTOM CLAMP ON ASSEMBLY & WILL TAKE 6-9 WEEKS FROM ORDER.
HOW TO MEASURE FOR CLAMP ON ADAPTER
We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.
Features:
- Multi-port brake softens felt recoil and reduces muzzle rise.
- A single expansion chamber and 39 total ports, provide maximum recoil control.
- Machined from high strength steel.
- 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- Dimensions: 67mm long, 15.9mm diameter,
- Weight: 63 Grams
Features:
- Multi-port brake softens felt recoil and reduces muzzle rise.
- A single expansion chamber and 39 total ports, provide maximum recoil control.
- Machined from high strength steel.
- 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- Dimensions: 67mm long, 18mm diameter,
- Weight: 63 Grams
Features:
- 5 horizontal cutouts equally spaced with compensation
- No Bottom Porting
- Made from machined steel
- Colour matte black
- Dimensions: 1.75" (4.4cm) long 7/8" (2.2cm)
- Thread diameter 1/2" - 20 tpi,
- Reduces muzzle blast, Reduces Muzzle Jum and helps dissipates gas for more control during shooting.
- Includes crush washer.
The Gunbloke Clamp on muzzle brake kit Bundled with the ELIMINATOR muzzle brake.
Clamping System Features:
- Add threads to a barrel without threading the barrel!
- The most clamping force on the market.
- Accepts Muzzle Brakes threaded in 5/8x24
- Milled from solid 416 stainless steel bar stock to exactly fit your barrel
- available in nearly any caliber and threaded 5/8-24.
Muzzle Brake Features:
- "THE ELIMINATOR" Muzzle Brake & Compensator provides recoil reduction with reduced muzzle blast.
- 3 large symmetric baffles, each featuring 2 large horizontal ports & 1 smaller vertical ports, redirect a massive volume of gas away from the bore axis whilst reducing muzzle jump.
- Machined from high strength steel or Stainless Steel
- 5/8x24 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with 3 symmetrical blast baffles redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
NO OTHER CLAMP ON MUZZLE BRAKE comes close.
PLEASE NOTE - THIS IS A CUSTOM CLAMP ON ASSEMBLY & WILL TAKE 6-9 WEEKS FROM ORDER.
HOW TO MEASURE FOR CLAMP ON ADAPTER
We need measurements of your barrel at the muzzle and 1.625″ back in thousandths of an inch.
Using good quality calipers or a micrometer take several measurements around the barrel at these two points and average each.
Using a DIAL CALIPER or MICROMETER measure the diameter of the barrel at the muzzle and 1.625" from the muzzle.
Please be as exact as possible to ensure we machine the correct diameter bore into your adapter.
Features:
- Multi-port brake softens felt recoil and reduces muzzle rise.
- A single expansion chamber and an array of ports with a closed off bottom for compensation provide maximum recoil control.
- Machined from high strength steel.
- 1/2-20 TPI thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
AVAILABLE IN: TITANIUM or ARMOR BLACK
Features:
- The Triple-Tac2 Muzzle Brake Compensator features 3 large expansion chambers which dissipates then directs the gases to the side , up and rear through the precisely canted vents.
- Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
- Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
- This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
- Machined from high strength steel.
- High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- 14x1mm thread 58mm OAL, 25.4mm dia, 100g.
- PLEASE NOTE Internal bore is .330, available in larger ID's to suit bigger calibres
Features:
- Maximum Recoil Reduction for Long Range Precision Rifles.
Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates. - High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Machined from high strength steel bar.
- 18x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
Features:
- Maximum Recoil Reduction for Long Range Precision Rifles.
Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates. - High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Machined from high strength steel bar.
- 14x1mm thread featuring High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
Includes lock nut to suit.
THE EXTERMINATOR - 14x1mm
Features:
- THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
- Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
- Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
- This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
- Machined from high strength steel.
- High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- 70mm OAL, 24.7mm dia, 120gr.
- 14x1mm thread
THE EXTERMINATOR - 18x1 - any cal
Features:
- THE EXTERMINATOR Muzzle Brake Compensator features 5 large expansion chambers which dissipates then directs the gases to the side and rear through the precisely canted vents.
- Highly efficient reverse venting design reduces recoil and blowback while eliminating muzzle jump.
- Closed in bottom compensator greatly reduces the dust signature & will not throw dust up.
- This not only provides maximum recoil reduction of approx 70% but also reduces the torsional recoil force associated with heavy bullets and fast twist rates.
- Machined from high strength steel.
- High pitch diameter tolerance class 3B threads machined in the same operation as the bore ensures a perfect concentricity, this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy.
- Computer CAE optimized for maximum strength to weight ratio and impact survivability
- 18x1mm thread
- 70mm OAL, 24.7mm dia, 120gr.
Wild Dog Detachable Magazine Kit to suit Tikka T3 / T3X short action rifles
FOR SALE IN AUSTRALIA ONLY - NOT FOR INTERNATIONAL SALES - WILL ONLY BE SHIPPED TO AUSTRALIAN ADDRESSES.
Accepts Accuracy International & compatible Magazines.
Includes either:
1 x 10 round .223 Polymer magazines (Suits .204 Ruger, .222, .223, .300BO)
or
1 x 10 round .308 Steel Magazine (Suits 22-250, .243, 6.5CM, 7-08, .308Win)
MADE IN AUSTRALIA